We believe you won't find a finer quality belt, at any price. Made in high-grade 5mm thick calf leather, the belts feature a disinctive marcopunto edge-stitch, which both stitches and embosses the leather at the sides of the belt. The satin silver finished metal buckle is understated and appropriate. There are no logos visible on the outside of the belt or buckle.
The belts are cleverly designed with a removeable buckle so that the body of the belt can be shortened from the buckle end.
How to Shorten Our Belts
Ideally the belt should be adjusted so that the correct length uses the middle hole. If you find the belt is too long, measure it against a belt that fits well to determine how much shorter it needs to be. Note: Measure to the belt holes, not simply to the end of the tail (as the holes may start at different distances from the end of the tail).
Adjustment is a simple procedure that requires a screwdriver, a sharp pair of scissors and something to make a small hole in the belt. This hole will not be visible when the belt is reassembled: Remove the screw from the buckle end of the belt. The buckle and its retaining strap can now be removed from the main body of the belt. From the buckle end of the belt, mark where you need to cut. Please check this again before proceeding.
Using a sharp pair of scissors, cut at the mark. Then using the cut off end as your guide, mark the belt where the new screw hole should be drilled. Form the hole using a bradawl or hole punch. Re-assemble the belt.